The Tools You Need To Do Quality Work On 1911s This kit includes the 21 most essential tools necessary to assemble, disassemble, improve performance, and to do general maintenance on 1911-style pistols. Plus, we put them in a heavy-duty case and added a large, bench/field mat to protect guns, parts and your bench. Kit is made up of: 1 - #81 MAGNA-TIP® SOLID HANDLE - Rugged and hand filling with a powerful magnet for fast bit changes. Suitable for dozens of jobs when working on 1911s. SPECS: 1 1/4" (3.2cm) diameter, 8" (20.3cm) long overall. 2 - 3/32" ALLEN BIT - Inserts into the Magna-Tip screwdriver to remove Allen-head grip screws. SPECS: Steel, heat treated. Fits Brownells 1911 Auto and Ruger MkI/MkII grip screws. 3 - #240-5 SLOTTED BIT - Inserts into the Magna-Tip screwdriver to remove slotted grip screws. SPECS: Steel, heat treated. Fits Brownells 1911 Auto and Ruger MkI/MkII grip screws. 4 - T15 TORX BIT - Inserts into the Magna-Tip screwdriver to remove torx grip screws. SPECS: Steel, heat treated. Fits Brownells 1911 Auto and Ruger MkI/MkII grip screws. 5 - MAGNA-TIP .45 BUSHING DRIVER BIT - Supports grip bushings for easy removal; fits in the Magna-Tip Handle above. SPECS: 19/16" (3.9cm) overall length, 1/4" (6.35mm) O.D. 6 - 1911 AUTO GRIP BUSHING STAKER - 8-segment, 90 degree head gives maximum contact with bushing for most secure installation possible. SPECS: Staker head - S5 Tool Steel with Rc 57-60 hardening. 4" (10.2cm) handle. 7 - BROWNELLS LUG IRON - Removes rough spots and machine marks from the slide lug area of 1911 Autos. SPECS: 8 3/4" (22.2cm) long. One-piece steel shaft and head. 8 - 1911 AUTO ANODIZED BUSHING WRENCH - Non-marring aluminum gets the tightest bushings loose. Fits Govt. and Officers. SPECS: Aluminum, red anodized. 5 1/2" (14cm) long, 1 1/4" (3.2cm) wide, 1/4" (6.35mm) thick. 9 - PLUNGER TUBE CRIMPER KIT - Easy-to-use tool lets you secure the plunger tube to the frame without fear of tube crush or frame damage. SPECS: Steel, 7" (17cm) long. Crimper Kit includes crimper and plunger tube support. Includes external reinforcing block. Plunger Tube Support - Hardened steel. 4" (10.2cm) long, .106" (2.7mm) diameter. Step is .300" (7.6mm) long, .090" (2.3mm) diameter. 10 - 1911 AUTO SAFETY DETENT DEPRESSOR - Slips behind the thumb safety; cupped tip won't slip off lock detent pin. Press in and pop the safety into place. SPECS: Steel shaft, plastic handle, 5" (12.7cm) long. 11 - MAINSPRING HOUSING PIN PUSHER - Pops the mainspring housing pin out easily. SPECS: Approx. 3" (7.6cm). RC 50 steel shank, plastic handle. 12 - 1911 AUTO TRIGGER STIRRUP DIE - Smoothes out bends and bumps found in production triggers to match-fit them for smooth travel. SPECS: Hardened Steel. 1-15/16" (23.8mm) long, 5/8" (15.9mm) thick, 1 1/2" (3.8cm) high. 13 - 1" NYLON/BRASS HAMMER COMBO - Brass head for driving various pins; no-mar nylon head for soft “tapping”. SPECS: 1" (2.5cm) diameter faces. 11 1/2" (29.2cm) hickory handle. Weighs approximately 6 oz. (170.1g). 14 - BLUE PISTOL BENCH BLOCK - Large, durable bench block; won't embed or mar when pounding out pins. SPECS: Polyethylene blue. 4" (10cm) diameter, 1-1/8" (2.8cm) high. 15 - NYLON FRONT SIGHT PUNCHES - Non-marring punch lets you drift the front sight right or left without damage to the sight. SPECS: 4" (10.2cm) long. 5/16" (7.9mm) diameter. Polyenco Nylon. Sold in a set of 3. 16 - BROWNELLS FRONT SIGHT STAKER - Offset punch efficiently directs the full force of the hammer blow downward against the sight tenon to stake front sights tightly. SPECS: Steel, blued. 5/16" (7.9mm) x 1/2" (12.7mm) x 4 1/2" (11.4cm) long shaft. Replaceable, hardened steel tip. Fits 1911 Auto. Includes complete instructions. 17 - 1911 AUTO EXTRACTOR REMOVAL TOOL - Dual-purpose tool prevents scarred breech faces, scratched slides and gives fast, easy extractor removal every time. SPECS: Steel, blue, matte finish. 6" (15.2cm) long, 3/8" (9.4mm) diameter handle, .150" (3.7mm) diameter lever. 18 - #120-3 BIT - Fits slotted magazine catch locks. SPECS: Steel. .120" (3.1mm) shank diameter, .03" (.76mm) blade thickness. 19 - #185-00 HEX-HEAD BIT - Fits hex-head (Allen) magazine catch locks. SPECS: Steel. 1" (2.54cm) long, 1/16" (1.6mm) thick. 20 - .120" BRASS ALIGNMENT & PUSH PUNCH - Helps install and remove hammer pins. SPECS: Plastic handle, 360 alloy punch. 4 3/4" (12cm) long. Punch - 3 1/4" (8.2cm) long. .120" (3.05mm) diameter. 21 - .092" BRASS ALIGNMENT & PUSH PUNCH - Helps install and remove sear pins. SPECS: Plastic handle, 360 alloy punch shaft. 4 3/4" (cm) long. Punch - 3 1/4" (8.2cm) long. .092" (2.3mm) diameter. 22 - BENCH/FIELD GUN MAT - Soft face prevents scratches and dings when working on your gun. Absorbs liquid, and includes a non-slip backing. SPECS: Polypropylene fiber, brown, expanded, vinyl acetate backing. 12" (30.5cm) x 24" (61cm). 23 - TOOL BOX - Heavy-duty, plastic box conveniently holds everything in one place. Perfect for the shop, armory, or as a take along to a match. SPECS: High-impact plastic. 15" (38.1cm) long, 7" (18cm) wide, 5" (13cm) high.